Product Description

Turbine Oil Purification Station 1.6 is designed to remove solid particles, as well as gases and water by means of thermo-vacuum purification, from lubricant and electric isolation oils such as power transformer oil, high-voltage switch oil, mutual inductor oil whose viscosity at temperature *0 C does not exceed *0 cSt. This system is used for installation, maintenance and operation of oil-filled high-voltage equipment with capacity up to ***0 kV (power transformers, high-voltage switchgear etc). It also recovers the oil color and removes acidity and vaccuumizes the equipment. The capacity of the system is 1.6 m3 per hour. Turbine Oil Purification Station 1.6 consists of oil heater, fine filter, oil pump, pre-filter, vacuum pump and vacuum drier, absorber, control cabinet, pipelines and valves. The main control circuit is interlocked with the pump drive control circuit, the control cabinet contains magnetic starter and a thermal regulator switch which controls and maintains temperature in the set range. Contaminated oil is fed through mesh filter in the oil gear pump pipeline to the oil heater. A heat conducting substance heats the oil to **5oC - **5oC. The heated oil then flows to the vacuum drier, where moisture is removed. Water vapor and gases are removed by the vacuum pump, and the dehydrated oil is pumped through the fine filter to a purified oil vessel.